Open-die drop forging (with two dies) of an ingot to be further processed into a wheelOpen-die forging is also known as smith forging. In open-die forging, a hammer strikes and deforms the workpiece, which is placed on a stationary anvil. Open-die forging gets its name from the fact that the dies (the surfaces that are in contact with the workpiece) do not enclose the workpiece, allowing it to flow except where contacted by the dies. Therefore the operator needs to orient and position the workpiece to get the desired shape. The dies are usually flat in shape, but some have a specially shaped surface for specialized operations. For example, a die may have a round, concave, or convex surface or be a tool to form holes or be a cut-off tool.
Open-die forging lends itself to short runs and is appropriate for art smithing and custom work. In some cases, open-die forging may be employed to rough-shape ingots to prepare them for subsequent operations. Open-die forging may also orient the grain to increase strength in the required direction.
Cogging is successive deformation of a bar along its length using an open-die drop forge. It is commonly used to work a piece of raw material to the proper thickness. Once the proper thickness is achieved the proper width is achieved via edging.
Edging is the process of concentrating material using a concave shaped open die. The process is called edging, because it is usually carried out on the ends of the workpiece. Fullering is a similar process that thins out sections of the forging using a convex shaped die. These processes prepare the workpieces for further forging processes.
References
http://en.wikipedia.org/wiki/Forging
At Walker Forge our dies are manufactured, heat treated and inventoried in house. In the pursuit of higher levels of productivity and increased process repeatability, all new and reworked dies are 100% Coordinate Measuring Machine (CMM) inspected. The CMM is also used to qualify the last piece from the die and provide strict process controls to maintain die quality.
For more information visit us at: http://www.walkerforge.com/
